150W UFO LED High Bay Light Warehouse High Bay Lighting
-------------------------------------------------Industrial lighting professional
Parameter
Feature
1.IP65 both for indoor and wet location
2.Various beam angleoptions:60degree,90degree,120degree
3.3030 led chip,140lm/w max
4.Intelligent microwave sensor,auto ON or OFF LED high bay
5.From 100w to 200w solution for 6 to 20 meters
6.Meamwell driver,1-10V and PWM or resistance dimmable available
7.5 years warranty
Installation instructions
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are sloid and in good condition once packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard stuff.
4. Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly while wiring.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well. Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid, free from electric leakage and electricity shock.
8. Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents. Lumin will not bear any responsibilities due to such deeds.
Application
Wide beam angle with good lighting distribution is quite suitable for industrial lighting,warehouse,factory,gym,etc.
Do's & Don't's
1. It's only used indoors.
2. Check if fixtures are in good condition before using.
3. Keep packing material away from children, and prevent children from playing.
4. Keep necessary accessories away from swallowing by Children.
5. Do not stare at light source directly for a long time.
6. Please don't cover anything on the fixture.
7. Do not disassemble or repair fixtures by unlicensed people. Otherwise, Lumin has the right to refuse replacement or maintenance.
8. Must switch off electricity before cleaning. Do clean fixtures with dry soft cloth, free from chemical or corrosive matters.
Trouble Shooting
Environmentally friendly
(1) No glare, mercury, ultraviolet, infrared or other hazardous substances
(2) Operating Temperature: -25ºC to 55ºC
(3) Operating Humidity: 10% to 80%
(4) Storage Temperature: -40 to +85 ºC
(5) Storage Humidity: 10% to 80%
Benifits
1.Replacing CFL tube fixture of 2*2 (62x62cm), saving 70% energy
2.The joint gap is tiny and there is no light link.
3.The light distribution is uniform,without bright border.
4.The back plate is lighter weight and better heat dissipation.
5.LED driver adopt double screen input and output line,with CE certification,with famous LED driver.
Our company profile
ased in Shenzhen, Lumin Lighting is a fast-growing semiconductor lighting manufacturer and supplier in China. Lumin Lighting was founed on November 17, 2008.
So Lumin Brand have more than ten years exprience in lighting business.
Main products: LED panel light, LED linear light, LED downlight, LED track light, LED high bay light. Meantime,OEM/ODM services,customized solutions services.
As a Legal ISO9001 Factory.with all products have TUV CE, RoHS, SAA,CB and UL listed.
Why Lumin?
1. Quality is our Culture
2. Fast Delivery Time
3. Legal Business Assurance and Trust
4. Professional Customer-care Service
5. Customiztion is acceptable
6. Cooperate to Develop Your New Products
FAQ
Other items you may like it
1.IP65 panel light ( plz send us enquiry to know more information)
2.Frameless panel light/ cct dimmable/ CRI90 / 130lm/w optional
3.IP65 linear high bay light / Lighting height 6~30m / 60w-600w optional
More details Contact us,best regards,Jam Liu
Best service
(1) Your inquiry will be replied within 12 hours;
(2) Fast sample delivery: 3 days around.
(3) Best-trained and experienced sales staffs follow up with your inquiries and orders;
(4) OEM/ODM services: All can be customized;
(5) Distributor, agent, investor and more are welcome;
(6) 3-5 years warranty: Spare parts can be offered along with orders.
-------------------------------------------------Industrial lighting professional
Parameter
Model | LM-UHB150 |
Power | 150W |
Luminous | 21000LM |
Input Voltage | AC100-277V |
CRI | Ra>80 |
CCT | 3000K-3500K/4000K-4500K/5500K-6500K |
Dimmable Solution | PWM/ 0/1-10V /RESISTORS |
Installation | Suspended |
Light Efficacy | 140LM/W |
IP,IK Rating | IP65,IK07 |
Warranty | 5 year limited |
Dimension | 460*460*230MM |
Weight | 4.5KG |
Feature
1.IP65 both for indoor and wet location
2.Various beam angleoptions:60degree,90degree,120degree
3.3030 led chip,140lm/w max
4.Intelligent microwave sensor,auto ON or OFF LED high bay
5.From 100w to 200w solution for 6 to 20 meters
6.Meamwell driver,1-10V and PWM or resistance dimmable available
7.5 years warranty
Installation instructions
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are sloid and in good condition once packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard stuff.
4. Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly while wiring.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well. Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid, free from electric leakage and electricity shock.
8. Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents. Lumin will not bear any responsibilities due to such deeds.
Application
Wide beam angle with good lighting distribution is quite suitable for industrial lighting,warehouse,factory,gym,etc.
Do's & Don't's
1. It's only used indoors.
2. Check if fixtures are in good condition before using.
3. Keep packing material away from children, and prevent children from playing.
4. Keep necessary accessories away from swallowing by Children.
5. Do not stare at light source directly for a long time.
6. Please don't cover anything on the fixture.
7. Do not disassemble or repair fixtures by unlicensed people. Otherwise, Lumin has the right to refuse replacement or maintenance.
8. Must switch off electricity before cleaning. Do clean fixtures with dry soft cloth, free from chemical or corrosive matters.
Trouble Shooting
Problem | Possible Cause | Solutions |
Can not light up | Wrong or loose wiring connection | Double check wiring methods, and connect in the right way. Do cut off electricity before wiring |
Using wrong LED driver | Replace it with adaptive LED driver | |
LEDs damaged or LED driver damaged | Repair or replace it with new light source or LED driver | |
Blinking light | Fixtures do not match LED driver, or LED driver fails | Repair or replace it with new driver. |
Environmentally friendly
(1) No glare, mercury, ultraviolet, infrared or other hazardous substances
(2) Operating Temperature: -25ºC to 55ºC
(3) Operating Humidity: 10% to 80%
(4) Storage Temperature: -40 to +85 ºC
(5) Storage Humidity: 10% to 80%
Benifits
1.Replacing CFL tube fixture of 2*2 (62x62cm), saving 70% energy
2.The joint gap is tiny and there is no light link.
3.The light distribution is uniform,without bright border.
4.The back plate is lighter weight and better heat dissipation.
5.LED driver adopt double screen input and output line,with CE certification,with famous LED driver.
Our company profile
ased in Shenzhen, Lumin Lighting is a fast-growing semiconductor lighting manufacturer and supplier in China. Lumin Lighting was founed on November 17, 2008.
So Lumin Brand have more than ten years exprience in lighting business.
Main products: LED panel light, LED linear light, LED downlight, LED track light, LED high bay light. Meantime,OEM/ODM services,customized solutions services.
As a Legal ISO9001 Factory.with all products have TUV CE, RoHS, SAA,CB and UL listed.
Why Lumin?
1. Quality is our Culture
2. Fast Delivery Time
3. Legal Business Assurance and Trust
4. Professional Customer-care Service
5. Customiztion is acceptable
6. Cooperate to Develop Your New Products
FAQ
(Frequent Ask Questions) |
1. What're your main products? |
Our main products are led panel light, led linear light, led tube light, led track light, led high bay light and led downlight. |
2. How about your quality? |
We offer a medium-high quality level, the faulty rate is less than 0.3%. |
3. How long is your warranty? |
We offer 3~5 years warranty according to your demand. |
4. How long is the lead time? |
For samples 5-7 days, for bulk order 10-20 days depends on qty. |
5. What's the MOQ? |
Normally 100pcs, if with a special request, we will discuss together to decide. |
6. Where is your main markets? |
Our main markets are in Europe, South America, Africa,North America and the Middle East. |
7. What certificates do you have? |
We have CE, ROHS, SAA, ETL and DLC for our products. |
8. Can I get samples for testing? |
Yes, you can, if the sample value is small, we can offer a free sample, and freight will be paid by your side. |
9. How can I reach you? |
You can call our number 86-18682704360, or send a message to me, we will reply you within 12-24 hours. |
10. Can I be your sole distributor? |
It will depends on products and your purchasing qty, so we can discuss later. |
1.IP65 panel light ( plz send us enquiry to know more information)
2.Frameless panel light/ cct dimmable/ CRI90 / 130lm/w optional
3.IP65 linear high bay light / Lighting height 6~30m / 60w-600w optional
More details Contact us,best regards,Jam Liu
Best service
(1) Your inquiry will be replied within 12 hours;
(2) Fast sample delivery: 3 days around.
(3) Best-trained and experienced sales staffs follow up with your inquiries and orders;
(4) OEM/ODM services: All can be customized;
(5) Distributor, agent, investor and more are welcome;
(6) 3-5 years warranty: Spare parts can be offered along with orders.